Sea & Sea YS-D3 Duo Underwater Strobe
$1,289.95 CAD
High-spec underwater strobe with large light output.
Product Description
The YS-D3 DUO is a high-specification underwater strobe with three shooting modes: DS-TTL, RC mode, and manual. Custom settings allow the strobe to be used with high precision with a variety of cameras and shooting styles.
Blue：DS-TTL
Red：RC mode
Orange：Manual 1
For the camera with pre-flash function.
Green：Manual 2
For the camera without pre-flash function.
Highly accurate DS-TTL dimming
DS-TTL dimming accuracy has been greatly improved by adopting a newly designed light receiving sensor.
By applying detailed custom settings, it can be used with high accuracy with a wide variety of cameras of multiple brands.
*When shooting TTL with a camera of a brand other than OM SYSTEM (OLYMPUS), select DS-TTL as the shooting mode.
*Pre-custom settings must be made for each camera in advance when shooting with DS-TTL.
In DS-TTL mode. Exposure compensation can be made with the light level control dial on the right. +2.0 to -2.0
Highly accurate DS-TTL dimming
The “RC System” is a flash system for OM SYSTEM digital cameras, and the YS-D3 DUO was developed in collaboration with OM Digital Solutions to incorporate the RC mode.
RC mode is a light control mode in which the camera automatically controls the flash output based on the brightness through the lens. The YS-D3 DUO is equipped with a more precise “RC mode” that was developed based on system information officially provided by OM Digital Solutions. The YS-D3 DUO is equipped with a more precise “RC mode” developed based on the system information officially provided by OM Digital Solutions.
*Since the strobe is system-linked to the camera, flash output compensation can be adjusted not only on the strobe side but also on the camera side while shooting in RC mode.
*Setting the camera to RC mode can prolong (save) the camera’s battery life.
In RC mode. The light level control dial on the right can be used for exposure compensation.
Manual mode has 11 steps
In manual mode, light intensity can be adjusted in 11 steps. The settings are (GN: 1 / 1.4 / 2 / 2.8 / 4 / 5.6 / 8 / 11 / 16 / 22 / 33). The value can be easily seen on the scale on the light intensity adjustment dial. Compatible with digital cameras that do not have a pre-flash function.
*Only manual flash is available, but if your camera housing is equipped with a strobe connector/converter connector, you can also use a sync cord to connect the strobe.
In manual mode. Select the guide number with the light level control dial.
YS-D3 DUO can also be connected with a sync cord
The YS-D3 DUO can be set up with high precision to accommodate a variety of shooting styles with different cameras by making custom settings. Refer to the table for settings according to the shooting mode used and the method of synchronizing the camera and strobe.
Additional Information
| Weight | 7 lbs |
|---|---|
| Brand | Sea & Sea |
| Colour | Gold, Red, White |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.