Analytical Industries Oxygen Sensor, Molex (R22)
The Analytical Industries PSR-11-39-MD is the replacement oxygen sensor for the Teledyne R-22D.
The Analytical Industries (AI) PSR-11-39-MD, with a 3-pin Molex connector, is compatible with the Teledyne R-22D sensor, Maxtec MAX-305F sensor, NRC D-05 sensor.
The Analytical brand PSR-11-39-MD is used in the Apeks DSX Computer, Dive Rite O2ptima, Poseidon Se7en & Discovery VI, Hollis Prism2 & Explorer MK2, all current KISS models, Hammerhead, Liberty, SubGravity and many other brands of rebreathers. The PSR-11-39-MD is NOT compatible with the ISC Megalodon or the Mares rEvo.
- Measuring Range: 0-100%
- Accuracy (1): +/- 2% of Full Scale
- Signal Output (2): 8.5 – 14 mV
- Linearity: +/- 2% of Full Scale
- Response T90: 6 sec
- Temp Coefficient: compensated
- Operating Temp: 0 to 45C
- Recommended Storage (3): 0 to 25C
- Qualified at: 1.8 ATA
- Shelf Life (4): 6 months
- Humidity Non-condensing: 0-99% RH
- Expected Life: 42 months
- Warranty (5): 12 months after purchase, or 15 months after manufacture (whichever comes first
Electrical Conn: 3 pin Molex
Conditions: 1) At constant temperature and pressure. 2) In air (20.9% oxygen) at 25C and 1 atm. 3) Sensor may be stored up to 55C on an intermittent basis, for example, during transportation. 4) In original Package at 25C and 1 atm. 5) Under normal operating conditions, the sensor is warranted to be free of defects in material and workmanship for the specified period provided the sensor is properly installed and operated. The sole remedy for sensor determined to be defective by Analytical Industries Inc. is limited to replacing the sensor. Analytical Industries In. will not be liable for buyer’s negligence, misapplication, abuse or accident.
Only logged in customers who have purchased this product may leave a review.